Update: Acres burned in Fresno County grows to 75 acres, Stoney Fire hits 60% containment

The creation of this content included the use of AI based on templates created, reviewed and edited by journalists in the newsroom. Read more on our AI policy here.

Updated: 6:25 a.m. June 15

First discovered: 16 hours ago, 1:42 p.m. June 14

Initial location: South end of Fallen Oak Rd, Tollhouse, Fresno County, Calif.

Fire unit: Cal Fire Fresno-Kings Unit

Fire type: Wildfire

Fire name: Stoney Fire

Stoney Fire initially started 1:42 p.m. June 14 on South end of Fallen Oak Rd, Tollhouse in Fresno County, California.

After being active for 16 hours, it has burned 75 acres. A fire crew of 175 succeeded in containing 60% of the fire as of Monday morning. The cause is, however, still being investigated.

13 engines, two water tenders, two helicopters, three dozers and six hand crews are working to suppress the fire. According to Cal Fire, "Numerous firefighting air tankers from throughout the State are flying fire suppression missions as conditions allow."

Evacuation information from Cal Fire

Evacuation Warnings

Potential threat to life and/or property. Those who require additional time to evacuate, and those with pets and livestock should leave now.

Evacuation Warnings issued for the following zones:

K118

K119

K120

K130

See live video from the area:

Https://cameras.alertcalifornia.org/?id=Axis-FenceMeadowLookout1

Fire containment

What does it mean for a fire to be 60% contained?

Containment indicates what percentage of the fire perimeter has been surrounded by a control line. In this case, it means that 60% of the wildfire is halted from spreading, while 40% is still uncontrolled.

Containment is part of a larger plan for managing a wildfire. It is normally expressed as a percentage and it refers to how much of the fire perimeter has been surrounded/enclosed by a control line that firefighters create. The containment percentage indicates a certain level of control, but it doesn't always correlate to safety level. Also, it's important to note that containment doesn't mean a fire is out.

How is containment measured?

The incident's central command constantly receives progress reports from firefighters on the ground. As the fireline is constructed, inspected or reinforced, mappers record those details to adjust the containment percentage. The percentage tells the public how much of the fire perimeter is believed to not go beyond the control lines.

Source: Cal Fire

United Robots Sacramento

This story was originally published June 15, 2026 at 6:46 AM.