Update: Devil Fire in Kings County is now 100% contained

The creation of this content included the use of AI based on templates created, reviewed and edited by journalists in the newsroom. Read more on our AI policy here.

Updated: 7:56 a.m. June 14

First discovered: 17 hours ago, 2:33 p.m. June 13

Initial location: Near Devils Den Rd and 25th Ave, Kings County, Calif.

Fire unit: Cal Fire Fresno-Kings Unit

Fire type: Wildfire

Fire name: Devil Fire

Devil Fire initially started 2:33 p.m. June 13 at Near Devils Den Rd and 25th Ave in Kings County, California.

It has burned 75 acres after being active for 17 hours. A crew of 40 firefighters managed to contain the blaze entirely as of Sunday morning. However, investigations into the cause are ongoing.

Firefighting efforts included seven engines, one water tender and one dozer. According to Cal Fire, "Numerous firefighting air tankers from throughout the State are flying fire suppression missions as conditions allow."

Fire containment

What does 100% containment mean?

Note that full containment doesn't mean the fire is completely out. In this case, it means that firefighters have managed to get a line completely around the wildfire's perimeter and it is now stopped from spreading. A fully contained wildfire may continue to burn within the containment perimeter but is not likely to spread.

However, there's a significant difference between containing and controlling a wildfire. After the fire is fully contained, the next step is to control it. Controlling a fire means ensuring that the fire can't spread or cross the containment line.

Containment is part of a larger plan for managing a wildfire. It is normally expressed as a percentage and it refers to how much of the fire perimeter has been surrounded/enclosed by a control line that firefighters create. The containment percentage indicates a certain level of control, but it doesn't always correlate to safety level. Also, it's important to note that containment doesn't mean a fire is out.

How is containment measured?

The incident's central command constantly receives progress reports from firefighters on the ground. As the fireline is constructed, inspected or reinforced, mappers record those details to adjust the containment percentage. The percentage tells the public how much of the fire perimeter is believed to not go beyond the control lines.

Source: Cal Fire

United Robots Sacramento

This story was originally published June 14, 2026 at 8:27 AM.